One-Pot Bioelectrocatalytic Conversion of Chemically Inert Hydrocarbons to Imines.

Petroleum hydrocarbons are our major energy source and an important feedstock for the chemical industry. With the exception of combustion, the deep conversion of chemically inert hydrocarbons to more valuable chemicals is of considerable interest. However, two challenges hinder this conversion. One is the regioselective activation of inert carbon-hydrogen (C-H) bonds. The other is designing a pathway to realize this complicated conversion. In response to the two challenges, a multistep bioelectrocatalytic system was developed to realize the one-pot deep conversion from heptane to N-heptylhepan-1-imine under mild conditions. First, in this enzymatic cascade, a bioelectrocatalytic C-H bond oxyfunctionalization step based on alkane hydroxylase (alkB) was applied to regioselectively convert heptane to 1-heptanol. By integrating subsequent alcohol oxidation and bioelectrocatalytic reductive amination steps based on an engineered choline oxidase (AcCO6) and a reductive aminase (NfRedAm), the generated 1-heptanol was successfully converted to N-heptylhepan-1-imine. The electrochemical architecture provided sufficient electrons to drive the bioelectrocatalytic C-H bond oxyfunctionalization and reductive amination steps with neutral red (NR) as electron mediator. The highest concentration of N-heptylhepan-1-imine achieved was 0.67 mM with a Faradaic efficiency of 45% for C-H bond oxyfunctionalization and 70% for reductive amination. Hexane, octane, and ethylbenzene were also successfully converted to the corresponding imines. Via regioselective C-H bond oxyfunctionalization, intermediate oxidation, and reductive amination, the bioelectrocatalytic hydrocarbon deep conversion system successfully realized the challenging conversion from inert hydrocarbons to imines that would have been impossible by using organic synthesis methods and provided a new methodology for the comprehensive conversion and utilization of inert hydrocarbons.

Advances on the Merger of Electrochemistry and Transition Metal Catalysis for Organic Synthesis.

Synthetic organic electrosynthesis has grown in the past few decades by achieving many valuable transformations for synthetic chemists. Although electrocatalysis has been popular for improving selectivity and efficiency in a wide variety of energy-related applications, in the last two decades, there has been much interest in electrocatalysis to develop conceptually novel transformations, selective functionalization, and sustainable reactions. This review discusses recent advances in the combination of electrochemistry and homogeneous transition-metal catalysis for organic synthesis. The enabling transformations, synthetic applications, and mechanistic studies are presented alongside advantages as well as future directions to address the challenges of metal-catalyzed electrosynthesis.

Biphasic Bioelectrocatalytic Synthesis of Chiral ß-Hydroxy Nitriles.

Two obstacles limit the application of oxidoreductase-based asymmetric synthesis. One is the consumption of high stoichiometric amounts of reduced cofactor. The other is the low solubility of organic substrates, intermediates, and products in the aqueous phase. In order to address these two obstacles to oxidoreductase-based asymmetric synthesis, a biphasic bioelectrocatalytic system was constructed and applied. In this study, the preparation of chiral ß-hydroxy nitriles catalyzed by alcohol dehydrogenase (AdhS) and halohydrin dehalogenase (HHDH) was investigated as a model bioelectrosynthesis, since they are high-value intermediates in statin synthesis. Diaphorase (DH) was immobilized by a cobaltocene-modified poly(allylamine) redox polymer on the electrode surface (DH/Cc-PAA bioelectrode) to achieve effective bioelectrocatalytic NADH regeneration. Since AdhS is a NAD-dependent dehydrogenase, the diaphorase-modified biocathode was used to regenerate NADH to support the conversion from ethyl 4-chloroacetoacetate (COBE) to ethyl (S)-4-chloro-3-hydroxybutanoate ((S)-CHBE) catalyzed by AdhS. The addition of methyl tert-butyl ether (MTBE) as an organic phase not only increased the uploading of COBE but also prevented the spontaneous hydrolysis of COBE, extended the lifetime of DH/Cc-PAA bioelectrode, and increased the Faradaic efficiency and the concentration of generated (R)-ethyl-4-cyano-3-hydroxybutyrate ((R)-CHCN). After 10 h of reaction, the highest concentration of (R)-CHCN in the biphasic bioelectrocatalytic system was 25.5 mM with 81.2% enantiomeric excess (eep). The conversion ratio of COBE achieved 85%, which was 8.8 times higher than that achieved with the single-phase system. Besides COBE, two other substrates with aromatic ring structures were also used in this biphasic bioelectrocatalytic system to prepare the corresponding chiral ß-hydroxy nitriles. The results indicate that the biphasic bioelectrocatalytic system has the potential to produce a variety of ß-hydroxy nitriles with different structures.

Bioelectrocatalytic Conversion from N2 to Chiral Amino Acids in a H2/α-Keto Acid Enzymatic Fuel Cell.

Enzymatic electrosynthesis is a promising approach to produce useful chemicals with the requirement of external electrical energy input. Enzymatic fuel cells (EFCs) are devices to convert chemical energy to electrical energy via the oxidation of fuel at the anode and usually the reduction of oxygen or peroxide at the cathode. The integration of enzymatic electrosynthesis with EFC architectures can simultaneously result in self-powered enzymatic electrosynthesis with more valuable usage of electrons to produce high-value-added chemicals. In this study, a H2/α-keto acid EFC was developed for the conversion from chemically inert nitrogen gas to chiral amino acids, powered by H2 oxidation. A highly efficient cathodic reaction cascade was first designed and constructed. Powered by an applied voltage, the cathode supplied enough reducing equivalents to support the NH3 production and NADH recycling catalyzed by nitrogenase and diaphorase. The produced NH3 and NADH were reacted in situ with leucine dehydrogenase (LeuDH) to generate l-norleucine with 2-ketohexanoic acid as the NH3 acceptor. A 92% NH3 conversion ratio and 87.1% Faradaic efficiency were achieved. On this basis, a H2-powered fuel cell with hyper-thermostable hydrogenase (SHI) as the anodic catalyst was combined with the cathodic reaction cascade to form the H2/α-keto acid EFC. After 10 h of reaction, the concentration of l-norleucine achieved 0.36 mM with >99% enantiomeric excess and 82% Faradaic efficiency. From the broad substrate scope and the high enzymatic enantioselectivity of LeuDH, the H2/α-keto acid EFC is an energy-efficient alternative to electrochemically produce chiral amino acids for biotechnology applications.

Total Synthesis of Indolizidine Alkaloids via Nickel-Catalyzed (4 + 2) Cyclization.

A Ni-catalyzed (4 + 2) cycloaddition of alkynes and azetidinones toward piperidinones was used as key reaction in the enantioselective synthesis of naturally occurring indolizidine alkaloids. The reaction benefits from the use of an easily accessible azetidinone as an advanced and divergent intermediate to build the indolizidine core. This methodology has been applied in the total syntheses of (+)-septicine, (+)-ipalbidine, and (+)-seco-antofine to illustrate the applicability of the general approach.

Enantioselective Synthesis of Alkyl Allyl Ethers via Palladium-Catalyzed Redox-Relay Heck Alkenylation of O-Alkyl Enol Ethers.

Herein we report a transformation that generates an array of enantiomerically enriched, alkyl allyl ethers. Cyclic, acyclic, and heteroatom-bearing alkenyl triflates undergo an enantioselective, palladium-catalyzed C-C bond formation with diverse acyclic O-alkyl enol ethers in good yields and excellent enantioselectivities.

Enantioselective Synthesis of γ-Functionalized Cyclopentenones and δ-Functionalized Cycloheptenones Utilizing a Redox-Relay Heck Strategy.

In this report, the desymmetrization of cyclic enones under relay Heck conditions with an array of aryl boronic acids, alkenyl triflates and indole derivatives is described. This method grants facile access to diverse γ-functionalized cyclopentenones and δ-functionalized cycloheptenones. Using this approach, a formal synthesis of (S)-baclofen was completed in high yield and excellent enantioselectivity.

Formation of Chiral Allylic Ethers via an Enantioselective Palladium-Catalyzed Alkenylation of Acyclic Enol Ethers.

This report details a palladium-catalyzed process to access highly functionalized, optically active allylic aryl ethers. A number of electron-deficient alkenyl triflates underwent enantioselective and site-selective coupling with acyclic aryl enol ethers in the presence of a chiral palladium catalyst. This transform provides chiral allylic ether products in high yields and excellent enantiomeric ratios, furnishing a unique disconnection to incorporate heteroatoms at a stereocenter. Finally, the applicability of the products to target synthesis was demonstrated through the formation of a chiral allylic alcohol and the generation of a flavone-inspired product.